Searching For Your Code - Radio Shack Kameleon Owner's Manual

6-in-1 remote powered universal remote control
Hide thumbs Also See for Kameleon:
Table of Contents

Advertisement

3.
Press DEV once.The Device Setup
programming screen will appear:
4.
Press DVD once.The key will animate.
5.
Use the Setup Codes For DVD Player/VCR
Combos (on page 38) to locate the brand name
and then use the Number Keys to enter the first
four-digit code for your device. If performed
correctly, the bottom IR segment will flash
twice.
NOTE: If the bottom IR segment displayed one
long flash instead, an error has occurred. Try
entering the same code again.
6.
Aim the remote control at the device and press
POWER once.The device should turn off.
If the code works, press OK once.The bottom
7.
IR segmentwill flash twice.
8.
(Optional) If you've located a setup code that
works, but it also has a separate VCR code as
listed on page 38, you'll also need to program it
into the remote control to access VCR controls
as follows:
a
Press VCR once.
b
Using the Number Keys, enter the four
digit VCR code for your DVD Player/VCR
Combo. If performed correctly, the
bottom IR segmentwill flash twice.
c
Press OK once.The bottom IR segment
will flash twice.
NOTE: If a separate VCR setup code is not
listed, you can use the VCR key to program a
separate VCR device or another device (see
"Reassigning Device Keys" on page 19).
To exit programming, press HOME twice. The
9.
display will return to the last-selected device
menu screen.
10. For future reference, write down the working
DVD Player/VCR Combo code in the following
boxes:
DVD Player/VCR Code:
Brand Name:______________________
VCR Code (if used):
Brand Name:______________________

SEARCHING FOR YOUR CODE

If your device does not respond to the remote
control after trying all codes listed for your brand,
or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a CD or
DVD player or a VCR, turn on the device and insert
the required media.
For example, to search for a code for your TV:
1.
Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
Searching For Your Code/Searching For Your Code 9
O
'
M
WNER
S
ANUAL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents