Setting The Sleep Timer - Radio Shack Kameleon Owner's Manual

5. To exit programming, press HOME once.The
display will return to the last-selected device
menu screen
.
6. Now, after you select a device that has volume
unlocked, pressing VOL!, VOL#, or MUTE
will control the device's volume only in its own
mode.
U A V
NLOCKING LL OLUME
D S )
EFAULT ETTING
Press and hold P until the bottom IR segment
1.
flashes twice. The Program Keys will appear.
2. Press VOL once.The Volume Lock
programming screen will appear:
Press VOL ! once.The bottom IR
3.
segmentwill flash four times and the Program
Keys will appear again.
To exit programming, press HOME once.The
4.
display will return to the last-selected device
menu screen
.
5. Volume will again be independently controlled
according to its default states for all
programmed devices.
14 Setting the Sleep Timer/Setting the Sleep Timer
6- -O R P
IN NE EMOTE
(
C R
ONTROL ESTORING
B K
OWERED Y AMELEON

SETTING THE SLEEP TIMER

The Radioshack 6-in-1 Remote includes a sleep
timer that lets you set your devices up to be turned
off after a specified time, even if the device does not
have a sleep function.
E S
NABLING THE LEEP
If the SLEEP key does not operate your device's
built-in sleep timer or activate on the remote, you
must enable the sleep timer for that mode:
1. Press a mode key (i.e., TV, VCR, CBL/SAT, DVD,
CD, AUD).
Press and hold P until the bottom IR segment
2.
flashes twice. The Program Keys will appear.
Press OTHER once.The Other programming
3.
screen will appear:
4. Using the number keys, enter 9 7 0. The IR
segment will flash twice, confirming Sleep is
enabled.
The sleep timer is now enabled for that device.
Repeat these steps for each device where you want
to use the sleep timer.
T
IMER