Searching For Your Code - Radio Shack Kameleon Owner's Manual

RS Kameleon 8in1 UG 7/9/03
PROGRAMMING A DVD PLAYER/
VCR COMBO (continued)
5. Use the Setup Codes For DVD Player/VCR
Combos (on page 82) to locate the brand name
and use the number keys to enter the four-
digit code for your device. If performed cor-
rectly, the bottom IR segment will flash twice.
NOTE: If the bottom IR segment displays one long
flash instead, an error has occurred. Try entering the
same code again.
6. Aim the remote at the device and press PWR
once. The device should turn off. Press OK
once to save the code. The bottom IR segment
flashes twice.
7. (Optional) If you've located a setup code that
works, but it also has a separate VCR code as
listed on page 85, you'll need to program it into
the remote to access VCR controls, as follows:
a. Press VCR once.
b. Using the number keys, enter the four-
digit VCR code for your DVD Player/VCR
Combo. If performed correctly, the
bottom IR segment will flash twice.
c. Press OK once. The bottom IR segment
displays one long flash.
NOTE: If a VCR setup code is not listed, you can use
the VCR key to program a separate VCR or another
device (see "Reassigning Device Keys" on page 25).
8. To exit programming, press
display returns to the last-selected device
menu screen. For future reference, write the
working code in the below boxes:
DVD Player/VCR Code:
Brand Name:_______________________
VCR Code (if used):
Brand Name:_______________________
12 Programming A DVD Player/VCR Combo/Searching For Your Code
1:02 PM Page 12
8- -O R P
IN NE EMOTE OWERED

SEARCHING FOR YOUR CODE

If your device does not respond to the
RadioShack 8-in-One Remote after trying all
codes listed for your brand, or if your brand is
not listed at all, try searching for your code.
NOTE: Before performing a code search for a CD or
DVD player or a VCR, turn on the device and insert
the required media.
For example, to search for a code for your TV:
1. Press and hold P until the bottom IR segment
2. Press SEARCH once.The Search Codes
twice. The
3. Press a device key once (e.g., TV). The
4. Press PWR once to select it as the search test
B K
Y AMELEON
flashes twice. The program keys will appear:
programming screen will appear:
selected device key will animate.The device's
Main Menu screen will appear with
still displayed.
function. The Search Programming screen will
appear again.
NOTE: With PWR as the search test function, a
"Power On" IR command will be sent to the device