Brand Code Setup - Radio Shack 15-310 User Manual

2
Setup
Your universal remote can operate a TV, VCR, DVD, cable
or satellite.
Set up your universal remote in one of three ways:
• Brand Code Setup: Directly enter the device code
from the Code List. Try each code until you find one
that works for your device.
• Auto Code Search: Your universal remote
automatically goes through all the device codes.
(This method can take up to 45 minutes to search all
the codes for the 3 devices.)
• Manual Code Search: Manually goes through each
code for your device one by one at the touch of the
G button.
n
Note: Keep your remote pointed at the device that
you want to program throughout setup.

Brand Code Setup

1. Power on the device that you want to control.
2. Find the code (or codes) for your device in the
included Code List. If your device's brand is not
listed, use the Auto Code Search or Manual Code Search
method.
3. On your universal remote, press and hold SET, and
then press a device key (TV, VCR/DVD or STB/CBL).
5