Page 1
15-1931.fm Page 1 Monday, July 19, 1999 2:26 PM Cat. No. 15-1931 OWNER’S MANUAL 3-in-One Easy Remote Control Please read before using this equipment.
Page 2
15-1931.fm Page 2 Monday, July 19, 1999 2:26 PM FEATURES Your RadioShack 3-in-One Easy Remote Con- trol can replace up to three infrared remote con- trols. You can use it to control your TV, VCR, or cable converter. Unlike some universal remote...
15-1931.fm Page 4 Monday, July 19, 1999 2:26 PM HOW THE 3-IN-ONE WORKS Your RadioShack 3-in-One Easy Remote Control was designed to control the most commonly used functions on your TV, VCR, and cable converter. When you set up the remote control, its command keys work like the keys on your original remote controls.
15-1931.fm Page 5 Monday, July 19, 1999 2:26 PM PREPARATION INSTALLING BATTERIES Your remote control requires four AAA batteries (not supplied) for power. For the best perfor- mance and longest life, we recommend alkaline batteries such as RadioShack Cat. No. 23-555.
15-1931.fm Page 6 Monday, July 19, 1999 2:26 PM Cautions: • Always remove old or weak batteries. Batter- ies can leak chemicals that can destroy elec- tronic parts. • Dispose of old batteries promptly and prop- erly. Do not burn or bury them.
Page 7
15-1931.fm Page 7 Monday, July 19, 1999 2:26 PM 2. Press the device key for the type of remote you are replacing ( , or ). The red light blinks. 3. Hold down until the red light blinks twice, then enter the 3-digit code.
15-1931.fm Page 8 Monday, July 19, 1999 2:26 PM OPERATION 1. Press the device key for the device you want to control, then point the remote control at the device and press to turn the device 2. Repeat Step 1 for all other devices you want to operate.
15-1931.fm Page 9 Monday, July 19, 1999 2:26 PM to control the sound. To turn off punch-through, hold down until the red light blinks twice, then press and the device key. 9 9 3 If you want to control the volume through your ca-...
15-1931.fm Page 10 Monday, July 19, 1999 2:26 PM • If you enter a three-digit number, you do not need to press after entering the number. 4. Repeat Step 3 for other channels (up to 10) you want to include in your list. Then hold down until the red light blinks twice.
15-1931.fm Page 11 Monday, July 19, 1999 2:26 PM IF YOU HAVE PROBLEMS MANUAL CODE SEARCH If the 3-in-One Easy Remote Control does not op- erate your remote-controlled devices when you first set it up, you might have to manually find the correct code for your devices.
15-1931.fm Page 12 Monday, July 19, 1999 2:26 PM Determining the 3-Digit Code After you set up your remote control using manual code search, you can find which 3-digit code the remote control is set to by following these steps.
15-1931.fm Page 13 Monday, July 19, 1999 2:26 PM MANUFACTURERS’ CODES The following list tells you which 3-digit codes to enter to set up the remote control. Notes: • The remote control might not have every command of your original remote controls.
15-1931.fm Page 27 Monday, July 19, 1999 2:26 PM CARE AND MAINTENANCE Your RadioShack 3-in-One Easy Remote Control is an example of superior design and craftsman- ship. The following suggestions will help you care for your remote control so you can enjoy it for years.