Table of Contents
Advertisement
2.
Press SEARCH once.The Search Codes
programming screen will appear:
3.
Press a device key once (e.g., TV). The selected
device key will animate.The device's Main
Menu screen will appear with the HOME key
still displayed.
4.
Press POWER once to select it as the search test
function.The Search Programming screen will
appear again.
NOTE: With POWER as the search test
function, a "Power On" IR command will be
sent to the device each time a test code is sent.As
a confirmation, the IR segments will display an
outgoing animation.
NOTE: If your device or its original remote control
does not have a Power key, select a different test
function in this step (e.g., CH+, VOL+, Play, etc.).
5.
Aim the remote control at the device (e.g., TV)
and press ! one or more times. Stop when a
working code performs the test function
selected in step 4. If desired, use # to try a
previous code.
NOTE: In the search mode, the remote control
will send IR codes from its library to the selected
device, starting with the most popular code first.
6.
To lock in the code, press OK once.The bottom
IR segment flashes twice.
7.
To search for codes of your other devices,
repeat steps 3 to 6, but use the appropriate
device key and test function key for the device
you are searching for.
8.
To exit programming, press HOME twice. The
display will return to the last-selected device
menu screen.
10 Checking The Codes/Checking The Codes
6-
-O
R
P
IN
NE
EMOTE
B
K
OWERED
Y
AMELEON
CHECKING THE CODES
If you have set up the remote control using the
Searching For Your Code procedure (on the left), you
may need to find out which four-digit code is
operating your equipment. For example, to find out
which code is operating your TV:
Press and hold P until the bottom IR segment
1.
flashes twice. The Program Keys will appear.
2.
Press OTHER once.The Other programming
screen will appear:
Using the Number Keys, enter 9 9 0.The
3.
bottom IR segment flashes twice.
4.
Press a desired device key once (i.e., CBL/SAT,
CD, TV, DVD, AUDIO, or VCR). The selected
device key will animate.
5.
To view the code for the first digit, press 1
once.Count the number of times the bottom IR
segment flashes (e.g., three flashes = 3) and
write down the number in leftmost box in the
TV code boxes on page 8.
NOTE: If a code digit is "0", the bottom IR
segmentwill not flash.
Hide quick links:
Advertisement
Table of Contents
