Disabling The Sleep Timer; Using Macros; Programming A Favorite Channel Macro - Radio Shack Kameleon Owner's Manual

D S T
ISABLING THE LEEP IMER
If you prefer to use the device's sleep timer, rather
than the RadioShack 4-in-One Remote's, you may
disable the sleep timer for that mode:
Press a mode button (i.e., TV, VCR, CBL/SAT,
1.
DVD).
2. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
3. Press OTHER once.The Other programming
screen will appear:
4. Using the number keys, press 9 7 0. The top IR
segment will blink four times to show that the
sleep timer is no longer available.
The sleep timer is now disabled for that device.
Repeat these steps for each device where you want
to prevent the use of the sleep timer.
S S T
ETTING THE LEEP IMER
If you want to set any device to turn off after a
specified time:
1. Press a mode key (AUD, CD, TV, VCR, DVD, CBL/
SAT).
2. Press the Sleep key until the desired time is
set. The timer increases by 15 minutes each
time you press the key, up to 60 minutes.
When the timer counts down to 0, the remote sends
a "power off " signal to the selected device.
The sleep timer will work even if you have
reassigned the mode key to a different mode (see
"Reassigning Device Keys" on page 19).
If you turn off the device yourself, the sleep timer
turns off as well.

USING MACROS

The Radioshack 6-in-1 Remote includes three
Macro Keys, M1, M2, and M3. Each one can be set
up to perform a repetitive, time-consuming
operation with the press of a single key.
A macro can be used to control a home theater
operation, to set a favorite channel, or for other
multiple functions you would like to control with
one key press. Moreover, each Macro Key can hold
up to 15 key presses total.
NOTE: Programming a new macro over an existing
one will erase the original macro.
P F
ROGRAMMING A AVORITE
With so many channels available on your cable or
satellite system, you can program a macro that
directly selects a favorite channel with one key
press.
For example, let's assume your favorite cable
programs are on channel 71.Use the following
instructions to program a macro for direct access of
this channel:
1. Press and hold P until the bottom IR segment
flashes twice. The Program Keys will appear.
Using Macros/Using Macros 15
O ' M
WNER S ANUAL
C M
HANNEL ACRO