Table of Contents
Advertisement
INST ALLATION -
"-_ _ _ _ _ _ _ _ ----r[[]
UNPACKING AND INSPECTION
The procedures for unpacking this interface are described below. Please follow these procedures to
preserve your rights under the laws governing freight shipments and to protect the hardware. You
will find these procedures in many Hewlett-Packard hardware manuals.
Look for obvious signs of damage to the package. If the outside of the box is damaged or has water
stains, or the box rattles, contact the carrier. Ask that a carrier's agent be present when you open the
box. If there is no obvious reason to have the carrier's agent present read the cautions below and on
the box before proceeding.
Cautions
Please read "Safety Considerations" at the front of this manual, especially the portion dealing with
static electricity.
CAUTION
The A-to-D card (see figure 2-2 for an outline drawing
of this card) contains static sensitive devices. Use anti-
static handling procedures when working with it.
When you re:move the A -to-D card from its packing material handle it by the edges or the plastic
levers (extractors) in the corners next to the right-angle posts. Do not touch the gold-plated contacts
at the end of the card opposite the right-angle posts. If you do get a fingerprint on the gold-plated
contacts or the right-angle posts, clean them with a lintless tissue moistened with a small amount of
isopropyl alcohol.
CAUTION
Never clean the contacts or the right-angle posts with
an abrasive cleaner such as an eraser because the plating
may be damaged.
Inspect c:ontents
Check the contents of the package to verify that you have received the product and options you or-
dered. Refer to the description of the Standard Product and options in Section I, and your invoice. If
any parts appear to be missing, notify your Hewlett-Packard Sales and Service office.
Inspect the contents carefully for hidden damage such as detached components, corrosion, or cracks
and dents. Notify the carrier who delivered this product and your Hewlett-Packard Sales and Service
office if you find any damage. Save the packing material for the carrier. A representative at our
Sales and Service office. will arrange for repair or replacement without waiting for the settlement of
the claim against the carrier.
2-1
Advertisement
Table of Contents
