Supported Routing Platforms; Using The Indexes; Using The Examples In This Manual; Merging A Full Example - Juniper JUNOS OS 10.4 Manual

Supported Routing Platforms

Using the Indexes

Using the Examples in This Manual

Merging a Full Example

Copyright © 2012, Juniper Networks, Inc.
For the Layer 2 features described in this manual, the Junos OS currently supports the
following routing platforms:
Juniper Networks MX Series 3D Universal Edge Routers
This reference contains a standard index with topic entries.
If you want to use the examples in this manual, you can use the
command. These commands cause the software to merge the incoming
merge relative
configuration into the current candidate configuration. The example does not become
active until you commit the candidate configuration.
If the example configuration contains the top level of the hierarchy (or multiple
hierarchies), the example is a full example. In this case, use the
If the example configuration does not start at the top level of the hierarchy, the example
is a snippet. In this case, use the
described in the following sections.
To merge a full example, follow these steps:
From the HTML or PDF version of the manual, copy a configuration example into a
1.
text file, save the file with a name, and copy the file to a directory on your routing
platform.
For example, copy the following configuration to a file and name the file
Copy the
ex-script.conf
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
command. These procedures are
load merge relative
file to the directory on your routing platform.
/var/tmp
About This Guide
load merge or the load
load merge command.
.
ex-script.conf
xv