Basic Layer 2 Features On Mx Series Routers; Layer 2 Features For A Bridging Environment - Juniper JUNOS OS 10.4 Manual

3d universal edge routers solutions junos os
Hide thumbs Also See for JUNOS OS 10.4:
Table of Contents

Advertisement

CHAPTER 2
Basic Layer 2 Features on MX Series
Routers

Layer 2 Features for a Bridging Environment

Copyright © 2012, Juniper Networks, Inc.
Layer 2 Features for a Bridging Environment on page 21
Example Roadmap: Configuring a Basic Bridge Domain Environment on page 22
Example Step: Configuring Interfaces and VLAN Tags on page 24
Example Step: Configuring Bridge Domains on page 30
Example Step: Configuring Spanning Tree Protocols on page 32
Example Step: Configuring Integrated Bridging and Routing on page 34
You configure MX Series routers exactly as you would any other router running the Junos
OS. That is, all the familiar Layer 3 features and protocols are available on the MX Series
routers. However, you can configure Layer 2 features that are unique to the MX Series
routers. This chapter addresses Layer 2 configuration for the MX Series routers. For
information about configuring Layer 3 features and protocols, as well as comprehensive
information about interfaces and system basics, please see the other Junos configuration
guides.
Configuring Layer 2 features on an MX Series router can vary from the very simple
(aggregated Ethernet trunk interfaces, spanning trees), to the more complex (inner and
outer VLAN tags, broadcast domains), to the very complicated (integrated bridging and
routing, Layer 2 filtering). This chapter offers a fairly complex configuration for Layer 2
processing in a bridged environment.
Generally, there are four things that you must configure in an Layer 2 environment:
Interfaces and virtual LAN (VLAN) tags—Layer 2 interfaces are usually various type of
Ethernet links with VLAN tags used to connect to customer devices or other bridges
or routers.
Bridge domains—Bridge domains limit the scope of media access control (MAC)
learning (and thereby the size of the MAC table) and also determine where the device
should propagate frames sent to broadcast, unknown unicast, and multicast (BUM)
MAC addresses.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx series

Table of Contents