Juniper JUNOS OS 10.4 Manual page 184

Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide
Results
164
Enable ERP, specifying the control channels and data channels for
2.
NOTE: Always configure the
configuring the
[edit protection-group]
user@as1# set ethernet-ring ring-1 east-interface control-channel ge-2/0/5.0
user@as1# set ethernet-ring ring-1 east-interface control-channel vlan 100
user@as1# set ethernet-ring ring-1 west-interface control-channel ge-2/1/1.0
user@as1# set ethernet-ring ring-1 west-interface control-channel vlan 100
user@as1# set ethernet-ring ring-2 east-interface control-channel ge-2/0/5.
user@as1# set ethernet-ring ring-2 east-interface control-channel vlan 101
user@as1# set ethernet-ring ring-2 west-interface control-channel ge-2/1/1.0
user@as1# set ethernet-ring ring-2 west-interface control-channel vlan 101
user@as1# set ethernet-ring ring-2 data-channel vlan [500, 600]
Configure the routing instance, the bridge domains, and the VLAN IDs associated
3.
with each bridge domain:
[edit bridge-domains]
user@as1# set bd100 vlan-id 100
user@as1# set bd101 vlan-id 101
user@as1# set bd200 vlan-id 200
user@as1# set bd300 vlan-id 300
user@as1# set bd500 vlan-id 500
user@as1# set bd600 vlan-id 600
Check the results of the configuration:
user@as1> show configuration
interfaces {
ge-2/0/5 {
unit 0 {
family bridge {
interface-mode trunk;
vlan-id-list 100-1000
}
}
}
ge-2/1/1 {
unit 0 {
family bridge {
interface-mode trunk;
vlan-id-list 100-1000
}
}
}
protocols {
protection-group {
ethernet-ring ring-1 {
east-interface {
control-channel {
ge-2/0/5.0;
vlan 100;
east-interface
statement.
west-interface
Copyright © 2012, Juniper Networks, Inc.
and
ring-1 ring-2
statement first, before
: