Menu Settings; Menu Operation - Sony HKCU1001 Installation Manual

3-1. Menu Operation

DTX-5 Board
CHARACTER : ON
Status Display
VF Display
Camera Status
SD Signal Status
System Status
Diagnosis
System Diag 1
System Diag 2
System Diag 3
AT Board Diag
AVP Board Diag
CPU Board Diag
DTX Board Diag
DPR(SS-A) Board Diag
DPR(SS-B) Board Diag
DPR(SS-C) Board Diag
DPR(Slot1) Board Diag
DRX(Slot2) Board Diag
SLOT3 Board Diag
SDP/OTR Board Diag
CAMERA Diag
ROM Version
1. To operate the menu of CCU, open the front panel of HDCU3300, and use the CHARACTER switch,
CANCEL/ENTER switch, and +/_ switch on the DTX-5 board.
2. Pressing the CHARACTER switch upward displays the "status display menu" of CCU.
Pressing the +/_ switch upward (+) or downward (_) changes the pages and another screen is
displayed.
3. Pressing the CHARACTER switch downward displays CCU-MENU. CCU-MENU consists of the
"system menu" and the "configuration menu".
When the +/_ switch is pressed upward (+) or downward (_) on the CCU-MENU screen, "→" on
the screen moves.
Place "→" beside the desired item, and press the CANCEL/ENTER switch downward (ENTER) to
move to the menu you want to select.
To change each item on the CCU-MENU, select the page to be changed, and press the CANCEL/
ENTER switch downward (ENTER) once to confirm the selected page.
Use the +/_ switch to place "→" beside the item you want to change, and press the CANCEL/
ENTER switch downward (ENTER) once to confirm the item.
Use the +/_ switch to configure the setting of the item that has "?" beside it, and press the CAN-
CEL/ENTER switch downward (ENTER) once to confirm the setting.
4. To complete the "status display" and the CCU-MENU operation, set the CHARACTER switch to OFF.
HDCU3300/IM (J,E)
Section 3

Menu Settings

DTX
CCU
CAM
CHARACTER switch
CHARACTER
DISP
OFF
MENU
CANCEL/ENTER
CANCEL
switch
ENTER
+/_ switch
CCU Menu Page
** CCU-MENU **
SYSTEM OPERATION
CCU CONFIGURATION
System Menu
Output-Select S00
GEN-LOCK PHASE S01
MULTI FORMAT S02
OUTPUT FORMAT
SD ASPECT
RETURN FORMAT
RETURN SETUP
CCU VIDEO
SSM DETAIL
SSM FLICKER
MENU
Configuration Menu
COLOR BAR C00
BAR CHARACTER C01
MONITOR1
S03
MONITOR2
S04
I/F SETUP
S05
MIC/AUDIO
S06
INCOM/PGM
S07
PROMPT/TRUNK
S08
VIDEO SETUP
S09
VIDEO ADJUST VIDEO ADJUST
MENU SETTING
DISPLAY
DATE
C02
C03
C04
C05
C06
C07
C08
C09 C09
C10
C11
C12
3-1 (E)