Sony HKCU1001 Installation Manual page 26

Ref.No. Name
S4 MONI
RV1 MONI LEV
SDP-15 board
A B C D E
1
2
3
4
5
Ref.No. Name
S301 1-8 Factory Use Only
S302 Factory Use Only
1-20 (E)
Function
Sets the signal output to the character monitor (SD analog) output.
The character signal from each DRX board is connected directly to the
character monitor output, so only one character signal must be turned on,
and the character signals from the rest of the DRX boards must be turned off.
Set only the first DRX board to ON, and the rest of the DRX boards to OFF.
* : Set only the first board to ON, and the rest to OFF.
Adjusts the output level of the character monitor signal.
F G H J
S302
S301
SDP-15 (Side A)
Function
_
_
Factory default setting
*
Factory default setting
OFF (ALL)
OFF
HDCU3300/IM (J.E)