Installation Position Of The Option Board - Sony HKCU1001 Installation Manual

1-8. Installation Position of the Option Board

The following optional boards can be available for HDCU. Use different slots for each board and set the
switches respectively.
For the details, refer to Section 2-1, "System Connection".
Model
HKCU1001: SD Analog Interface Unit
HKCU1003: MULTI Interface Unit
HKCU1005: SDI Output Expansion Unit
* : HDCU3300 cannot use VDA-64C, which is the rear board of HKCU1003.
. When installing option board
No Front side
slot Board name
1 3 DRX-5
2 3 EN-159A
3-1 3 EN-159B
3-2 3 EN-159B
m
When installing the option board, keep the following points in mind:
. Install the option board to slot 3.
. VDA-64C, which is the rear board of HKCU1003, cannot be installed.
HDCU3300/IM (J,E)
Board
(slot in the front)
EN-159A
* EN-159B
DRX-5
Rear side
slot Board name
3 HIF-26
3 VDA-64A
3 VDA-64A
3 VDA-64B
Board
(slot in the rear)
VDA-64A
VDA-64A
VDA-64B
VDA-64C *
HIF-26
1-25 (E)