Sony HKCU1001 Installation Manual page 25

DRX-5 board
A B
1
DRX
1080
D201
720P D202
2
D203
SD
D204
PsF
D205
FC
3
D206
60
D207 D208
50
30
S1
D3
4
25
D210 D209
24
S2
5
Ref.No. Name Function
D201 1080 (Green) Illuminates when the Active-Line of the Main output is 1080-Format. (*)
D202 720P (Green) Illuminates when the Active-Line of the Main output is 720P-Format. (*)
D203 SD (Green) Illuminates when the Main output is SD-Format. (*)
D204 PsF (Orange) Not used (*)
D205 FC (Orange) Not used (*)
D206 60 (Green) Illuminates when the Main output is 1080-60i/59.94i or 720-60P/59.94P. (*)
D207 50 (Green) Illuminates when the Main output is 1080-50i or 720-50P. (*)
D208 30 (Green) Illuminates when the Main output is 1080-30PsF/29.97PsF. (*)
D209 25 (Green) Illuminates when the Main output is 1080-25PsF. (*)
D210 24 (Green) Illuminates when the Main output is 1080-24PsF/23.98PsF. (*)
D3 POWER Illuminates when the power to the DRX board has correctly started.
S1 MODE2 Not used
S2 MODE1
1 CLEAN Turns on or off the character MIX function of SDI monitor output (3, 4).
OFF: Normal SDI monitor output.
ON: Keeps the characters and the markers of the SDI monitor output (3, 4)
n
Settings are for each DRX board.
2 INTERLOC Format interlock function of the SDI output (3, 4).
OFF: Does not interlock the format of the SDI output (3, 4) to (1, 2).
ON: Interlocks the format of the SDI output (3, 4) to (1, 2).
n
Settings are for each DRX board.
3 to 8 Not used
HDCU3300/IM (J,E)
C D E F
RV1
S4
(*) : Blinks when the format setting is defective.
turned off.
G H J
DRX-5 (Side A)
Factory default setting
_
_
_
_
_
_
_
_
_
_
_
0
OFF
OFF
OFF
1-19 (E)