Installing The Option Boards - Sony HKCU1001 Installation Manual

1-9. Installing the Option Boards

Front side
1. Turn off the power, and unplug the power cord from
the outlet.
2. Remove the front panel. (Refer to Section 1-5.)
3. Insert the option board into right slot.
n
Check that the option board is securely connected to
the motherboard (MB-1073 board).
1-26 (E)
C P U
Front board
. DRX-5
. EN-159A
. EN-159B
Rear side
1. Remove the two screws, and remove the blank panel
by the handle.
n
Store the removed blank panel in a safe place.
Handle
Blank panel
2. Insert the option board into the slot.
m
. Insert the board into the lower grooves, and then
push the board straight into the slot.
. Check that the option board is securely connected to
the motherboard (MB-1073 board).
3. Fix the option board with the two screws removed at
step 1.
Rear board
. HIF-26
. VDA-64A
. VDA-64B
B3 x 5
B3 x 5
HDCU3300/IM (J.E)