Sony HKCU1001 Installation Manual page 67

Page Menu / Menu Image
C02 MONITOR1
<MONITOR 1> ?C02 TOP
CHARACTER
WHITE-LEVEL : 71.5%
BLACK-LEVEL :
PIX CHARACTER
WHITE-LEVEL : 75.0%
BLACK-LEVEL :
C03 MONITOR2
<MONITOR 2> ?C03 TOP
LEVEL-GATE : OFF
Y-LEVEL1 49%~ 61% -12
Y-LEVEL2 74%~ 108% -25
SKIN-GATE : OFF :
MODURATION : OFF :
MARKER : OFF
: VISTA
C04 I/F SETUP
<I/F SETUP> ?C04 TOP
BOARD FRONT
SSM-A:DPR-271A=> HIF-27
SSM-B:DPR-271A=> HIF-27
SSM-C:DPR-271A=> HIF-27
SLOT1:DPR-271B=> HIF-25
SLOT2:DRX-5 => HIF-26
SLOT3:EN-159A => VDA-64A
CAMERA VF :
REAR PREVIEW :=> MOMENTARY
C05 MIC/AUDIO
<MIC/AUDIO>
CHU MIC GAIN: (LOCAL)
CH1 : 60dB
CH2 : 60dB
MIC OUT
DELAY :
ANALOG OUT : MIC1/2
AES/EBU OUT: MIC1/2
: The settings in the box are default values.
HDCU3300/IM (J,E)
Item
CHARACTER
WHITE-LEVEL
BLACK-LEVEL
0.0%
PIX CHARACTER
0.0%
WHITE-LEVEL
BLACK-LEVEL
LEVEL-GATE
Y-LEVEL1
0
0
Y-LEVEL2
SKIN GATE
MODURATION
MARKER
BOARD
SSM-A
REAR SSM-B
SSM-C
SLOT1
SLOT2
SLOT3
NORMAL
CAMERA VF
REAR PREVIEW
CHU MIC GAIN
C05 TOP
CH1
CH2
0FS
MIC OUT
DELAY
ANALOG OUT
AES/EBU OUT
Setting Description
Sets white/black level for the character
0.0% to 107% 71.5% of the MONITOR output.
0.0% to 107% 0.0%
Sets white/black level for the character
of the PIX output.
0.0% to 107% 71.5%
Displays only when the analog encoder
0.0% to 107% 0.0% board (HKCU1001/1003) is attached.
OFF /1/2/1&2 Sets the mode for the CCU Y-LEVEL-
GATE function.
0% to 49% to 64% to 108%
_99 to _25 to +99
0% to 74% to 108% to 108%
_99 to _25 to +99
Turns ON/OFF Gate display for
OFF /ON
SkinTone Detail detection.
_99 to 0 to +99
OFF /ON Turns ON/OFF the mask function
outside the 4:3 frame in the EDGE
CROP mode.
_99 to 0 to +99
OFF /ON Turns ON/OFF the MARKER signal.
4:3
13:9
14:9
EU VISTA
VISTA
CINEMA
FOLLOW DC
FRONT / REAR Detects and displays the board attached
BOARD NAME DISPLAY to front/rear of Slots DPR A or Slots 1 to
BOARD NAME DISPLAY 3.
BOARD NAME DISPLAY
BOARD NAME DISPLAY
BOARD NAME DISPLAY
BOARD NAME DISPLAY
NORMAL /C-LINK Selects the video to repeat to the
camera VF.
MOMENTARY / Selects the operation mode of the REAR
PREVIEW output.
TOGGLE
(REMOTE/LOCAL) Displays local/remote for the camera
microphone amplifier settings.
20/30/40/50/ 60dB Sets amplifier gain for MIC-1 circuit.
20/30/40/50/ 60dB Sets amplifier gain for MIC-2 circuit.
0 to 1280Fs Sets audio output phase for the camera
microphone.
MIC1/2 /AES/EBU Selects the MIC OUT ANALOG output.
MIC1/2 /AES/EBU Selects the MIC OUT DIGITAL output.
Sets upper and lower levels for Level-
Gate 1 detection.
Sets the Zebra levels added to the
Level-Gate 1 detection width.
Sets upper and lower levels for Level-
Gate 2 detection.
Sets the Zebra levels added to the
Level-Gate 2 detection width.
Sets SKIN GATE level.
Sets the image level of the mask
portion.
3-13 (E)