Gas Line Location; Relocating The Gas Line To The Baseplate - Travis Industries 4415 HO GSR2 Installation Manual

Gas Line Location

Gas line may be plumbed from the left side (stock) or below. See illustration and table below to determine gas line location.
Left Side Gas Line Location (Stock)
Baseplate Gas Line Location
a
b

Relocating the Gas Line to the Baseplate

Remove the front panel (see page 13). Disconnect the gas inlet (shutoff valve) from the left side (keep the 4 screws). Re-
route the gas line to the baseplate and connect the gas inlet to the opening on the base using the 4 screws. Leak-test the gas
line to verify all connections are tight. Remove the plastic plug from the base and insert it into the hole on the left side.
Left Side Gas Line Location
© Travis Industries
Installation
(for qualified installers only)
a
4" (102mm)
6.25" (159mm)
b
3.25" (83mm)
18.75" (477mm)
a
Framing Opening
Baseplate Gas Line Location
4140108
15
b
100-01353