Selecting Audible Signal Operation; Warning Chimes And Warning Indicator - Subaru WRX 2015 Owner's Manual

2-14
Keys and doors/Keyless access with push button start system
doors.
Power saving function
The keyless access function will be
disabled in the following cases to protect
the access key battery and the vehicle
battery.
Case 1: When the keyless access func-
tion and the remote keyless entry system
have not been used for 2 weeks or longer
while all doors are locked
Case 2: When the access key has been
left in the operating range for 10 minutes
or longer while all doors are locked
Recovery from power saving
mode
When one of the following is operated, the
keyless access function will be recovered.
Case 1:
. Unlock the doors by operating any
procedure other than gripping the front
passenger s door handle
. Lock or unlock the doors
. Open a door and then close it
Case 2:
. Unlock the doors by gripping the door
handle
. Lock the doors by touching the door
lock sensor
. Lock or unlock the doors by using the
remote keyless entry system
. Lock or unlock the doors by using the
power door locking switch
. Open either of the front doors
Door unlock selection function
The door unlock selection function makes
it possible to unlock the driver s door
without unlocking any other doors. You
can change the setting for the driver s
door.
Operational: Only the driver s door will be
unlocked.
Non-operational: All doors will be un-
locked.
For the factory setting (default setting),
refer to Function settings
NOTE
The setting can be changed by your
SUBARU dealer. Contact your SUBARU
dealer for details. Also, the setting can
be changed by operating the multi
function display. For details, refer to
Keyless access setting (models with
keyless access with push-button start
system ) 3-88.
Selecting audible signal op-
eration
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may
change the volume of the audible signal
or turn it off.
NOTE
. The on/off setting of the audible
signal can be changed by operating
the multi function display. For details,
refer to Audible signal setting
. The volume of the audible signal can
be changed at SUBARU dealers. For
more details, contact a SUBARU deal-
er.
22.
Warning chimes and warning
indicator
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning indicator
on the combination meter in order to
minimize improper operations and help
protect your vehicle from theft.
For details, refer to Warning chimes and
warning indicator of the keyless access
with push-button start system
3-83.
3-26.