Switch; Speedometer; Odometer; Double Trip Meter - Subaru WRX 2015 Owner's Manual

Canceling the function for
meter/gauge needle move-
ment upon turning on the
ignition switch
It is possible to activate or deactivate the
movement of the meter needles and
gauge needles that takes place when the
ignition switch is turned to the ON
position. To change the setting, perform
the procedures described in Gauge Initial
Movement 3-44.

Speedometer

The speedometer shows the vehicle
speed. The digital speedometer can be
also displayed on the multi information
display.

Odometer

The unit displayed varies depending on the
models.
1) Trip knob
This meter displays the odometer when
the ignition switch is in the ON position.
The odometer shows the total distance
that the vehicle has been driven.
If you press the trip knob when the ignition
switch is in the LOCK / OFF or ACC
position, the odometer/trip meter will light
up. If you do not press the trip knob within
10 seconds of illumination of the od-
ometer/trip meter, the odometer/trip meter
will turn off.
Also, if you open and close the driver s
door within 10 seconds of illumination of
the odometer/trip meter, the odometer/trip
Instruments and controls/Meters and gauges
meter will turn off.

Double trip meter

1) Trip knob
This meter displays the two trip meters
when the ignition switch is in the ON
position.
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
If you press the trip knob when the ignition
switch is in the LOCK / OFF or ACC
position, the odometer/trip meter will light
up. It is possible to switch between the A
trip meter and B trip meter indications
while the odometer/trip meter is lit up. If
you do not press the trip knob within 10
seconds of illumination of the odometer/
3-9
CONTINUED