Table of Contents
Advertisement
glare from vehicle headlights behind you
and automatically dim the mirror to elim-
inate glare and preserve your vision. For
this reason, use care not to cover the
sensors with stickers, or other similar
items. Periodically wipe the sensors clean
using a piece of dry soft cotton cloth or an
applicator.
Compass zone adjustment
Compass calibration zones
1. Refer to the Compass calibration
zones map shown above to verify that
the compass zone setting is correct for
your geographical location.
2. Press and hold the switch for 6
seconds until the zone selection comes
up (a number will be displayed in the
mirror compass window).
3. Press the switch repeatedly until the
correct zone setting for your location is
displayed.
4. Releasing the button for 10 seconds
will exit the zone setting mode.
Compass calibration
1. If a C is displayed in the compass
window, the compass needs to be cali-
brated.
2. Drive the vehicle in a circle at 5 mph (8
km/h) or less until the display reads a
direction.
3. You can also calibrate the compass by
driving your vehicle on your everyday
routine. The compass will be calibrated
once it has tracked a complete circle.
4. To recalibrate your compass, push and
hold the switch for 9 seconds until a C
appears in the compass window.
5. Calibrate the compass according to
step 2 or step 3.
Instruments and controls/Mirrors
Auto-dimming mirror/com-
pass with HomeLink
®
equipped)
1)
HomeLink
button 1
®
2)
HomeLink
button 2
®
3)
LED
4)
HomeLink
button 3
®
5)
Sensor
6)
Automatic dimming on/off button
7)
Compass display button
8)
Compass display
The auto-dimming mirror has an anti-glare
feature which automatically reduces glare
coming from headlights of vehicles behind
you. It also contains a built-in compass
and HomeLink
wireless control system.
®
. By pressing the automatic dimming on/
off button, the automatic dimming function
is toggled on or off. When the automatic
CONTINUED
3-107
(if
Advertisement
Chapters
Table of Contents
