Table of Contents
Advertisement
3-30
Instruments and controls/Warning and indicator lights
Security indicator light
This indicator light shows the status of the
alarm system. It also indicates operation
of the immobilizer system.
Alarm system
It blinks to show the driver the operational
status of the alarm system. For detailed
information, refer to Alarm system
21.
Immobilizer system
The security indicator light starts blinking
in the following conditions.
For models with keyless access with
push-button start system :
. Immediately after the push-button igni-
tion switch is turned to the OFF position.
. Immediately after the driver s door is
opened or closed when all of the following
conditions are met.
The push-button ignition switch is in
the ON or ACC position.
The access key is outside the
vehicle.
The engine is not running.
In the event that an unauthorized
key is used (for example, the key is
unregistered or the ID code does not
match), the power is not switched to
ON and the security indicator light
continues blinking.
For models without
with push-button start system :
. Approximately 60 seconds after the
ignition switch is turned from the ON
position to the ACC or LOCK position.
. Immediately after the key is pulled out.
2-
If the indicator light does not blink in the
above conditions, it may indicate that
immobilizer system may be malfunction-
ing. Contact your nearest SUBARU dealer
immediately.
In the event that an unauthorized key (for
example, an unauthorized duplicate) is
used, the security indicator light illumi-
nates. For details about the immobilizer
system, refer to Immobilizer
NOTE
. The security indicator light remains
off in the following conditions. It means
that the matching of the ID code is
completed and the immobilizer system
is deactivated, and it does not indicate
a malfunction.
Models with
keyless access with
push-button start system :
while the engine is running
the push-button ignition switch
has been turned to the
ACC
keyless access
door has not been opened or closed
Models without
with push-button start system :
while the engine is running
for approximately 60 seconds
after the ignition switch is turned
from the
ACC or LOCK position
when the ignition switch is in the
ON position.
. Even if a malfunction occurs, such
as the security indicator light flashes
irregularly, it will not affect the func-
tionality of the immobilizer system.
2-2.
ON
or
position and the driver s
keyless access
ON
position to the
Advertisement
Chapters
Table of Contents
