Basic Screens - Subaru WRX 2015 Owner's Manual

Basic screens

These are the basic screens of the multi
function display.
Item
Information bar
Boost pressure + accelerator
opening ratio screen
Fuel consumption screen
ECO history screen
Vehicle activation status
screen
Triple meter screen
Guidance screen
Clock/calendar screen
Audio screen (if equipped)
By operating the or of the control
switch, you can switch the screen that is
always displayed. Also, when the
button is pushed and held, the selection
screen can be displayed. For details about
the selection screen, refer to Selection
screen 3-56.
Information bar
Page
3-49
3-50
3-51
3-51
3-52
3-53
1) Information bar
3-53
2) Outside temperature indicator
3) Top display
3-54
4) Clock
3-54
While the ignition switch is in the ACC or
ON position, the outside temperature
indicator, clock, etc. will be shown on the
information bar.
Outside temperature indicator
This displays the outside temperature
between −408F (−408C) and 1228F
(508C).
Instruments and controls/Multi function display
Icy road surface warning screen
When the outside temperature becomes
378F (38C) or less, the icy road surface
warning screen interrupts to inform the
driver that the road surface may be frozen.
NOTE
. The outside temperature indicator
shows the temperature around the
sensor. Therefore, the temperature in-
dication may differ from the actual
outside air temperature.
. The icy road surface warning screen
should be treated only as a guide. Be
sure to check the condition of the road
surface before driving.
. Once the icy road surface warning
screen is displayed, it will not be
displayed again unless the outside
3-49
CONTINUED