. When the
SCAN
button (type A
audio)/ SCAN/A.S
button (type B
audio) is pressed while data (except
for the MP3, WMA or AAC formats) is
played back, the system scans the
disc.
Display selection
TEXT button
If you press the TEXT button during
playback, the display will change as
shown in the following sequence.
For CD-DA:
For MP3/WMA/AAC:
®
For iPod
(when playing music):
®
For iPod
(when playing audiobook):
®
For iPod
(when playing podcast):
Page (track/folder title) scroll
If you press the TEXT button again and
hold it, the title will be scrolled so you can
see all of it.
NOTE
. The display is designed to show
titles of up to 24 characters.
. If no operations are performed for 10
seconds, the screen that was displayed
before pressing and holding the
TEXT button will be shown.
Audio/CD player operation
Folder selection
NOTE
Only MP3/WMA/AAC folders are recog-
nized when an attempt to select the
next or previous folder is made. If no
appropriate folder exists on the disc,
pressing the
or
side of the
FOLDER button starts playback be-
ginning with the first track.
Press the following buttons briefly.
To select the next
folder
To go back to the
previous folder
How to eject a CD from the
player
When a disc is being played back or when
a disc is in the player, press the
button. The disc will be ejected.
NOTE
. Avoid driving the vehicle with a CD
sticking out. The CD may fall out due to
vibration.
. If you do not remove the ejected
disc within approximately 15 seconds,
a disc protection function will operate,
automatically reloading the disc. In this
case, the disc is not played.
CONTINUED
5-21