Displaying and selecting preset
stations
NOTE
The list of the preset broadcasting
stations will be displayed when the
LIST button is briefly pressed while
receiving AM/FM. For details, refer to
Audio screen
3-54.
LIST button
TUNE dial (type A
audio)
TUNE dial (type B
audio)
Seek switch
1. Briefly press the LIST button during
AM/FM reception to display the radio
screen.
2. Display the preferred preset station by
performing either of the following proce-
dures.
Turn the TUNE dial
Briefly press the seek switch to the
or
side
3. Press the TUNE dial to select the
displayed station.
Audio/Satellite radio operation (type B audio)
Satellite radio operation (type
B audio)
Satellite radio reception
Satellite radio signals are best received in
areas with a clear view of the open sky. In
areas where there are tall buildings, trees,
tunnels or other structures that may
obstruct the signal of the satellites, there
may be signal interruptions. Other circum-
stances that may result in signal loss
include driving near a wall, steep cliff, hill
or driving on the lower level of a multi-
tiered road or inside of a parking garage.
To help reduce this condition, satellite
radio providers have installed ground-
based repeaters in heavily populated
areas. However, you may still experience
reception problems in some areas.
Displaying satellite radio ID
of tuner
When you activate satellite radio, you
should have your satellite radio tuner ID
ready because each tuner is identified by
its unique satellite radio tuner ID.
The satellite radio ID will be needed when
you activate satellite radio and receive
satellite radio customer support.
The satellite radio ID can be found on the
audio display when satellite radio is
5-15
CONTINUED