E r r o r M e s s a g e s
You may receive the following types of error messages:
Data Errors
Communication Errors
Some errors numbered 400-438 and 500-574 are internal
software errors. Errors numbered 900-999 are hard printer
failures. If you cannot clear an error, turn off the printer, wait
several seconds and then turn on the printer. Call Technical
Support if you receive any error message not listed in this chapter.
D a t a E r r o r s
Errors 001 to 405 and 429 to 435 are data errors. This type of
error indicates that incorrect data was sent to the printer, and the
printer is ignoring it. Your System Administrator should correct
the packet and send it back to the printer.
Error
001
002
003
004
005
006
007
010
011
6-4
Troubleshooting
Description/Action
Format ID number must be 1 to 999.
Name must be 1 to 8 characters inside quotes.
Action must be A (add) or C (clear).
Supply length is invalid.
Supply width is invalid.
Storage device must be R (volatile RAM).
Unit of measure must be E (English), M (Metric), or G
(Dots).
Field ID number is outside the range 0 to 999.
Field length exceeds 2710.
Rev. C 3/99