Service - Motorola RFS7000 Series Reference Manual

20-46 Overview

20.1.33 service

Wireless Configuration Commands
Use this command to invoke service commands to troubleshoot or debug the
configuration.
Syntax
service(show|wireless)
service show (cli)
service show wireless [ap-history <accessport MAC address>|
buffer-counters|enhanced-beacon-table|enhanced-probe-table|legacy-load-balance|
mu-cache-buckets|mu-cache-entry|mvlan|radio (<1-4096>|description|mapping)|snmp-
trap-throttle]
service wireless [ap-history|buffer-counters|clear-ap-log<1-256>|dump-
core|enhanced-beacon-table|enhanced-probe-table|idle-radio-send-multicast|
legacy-load-balance| radio-mic-cfg|rate-scale|
request-ap-log <1-256>|save-ap-log|snmp-trap-throttle]
Parameters
show
cli
wireless
service (show) wireless
ap-history
< AP MAC Address>
buffer-counters
enhanced-beacon-table
[config|report]
enhanced-probe-table
[config|report]
legacy-load-balance
mu-cache-buckets
mu-cache-entry
mvlan
radio (<1-4096>|
description|mapping)
Shows running system information.
Shows the CLI tree of the current mode.
Wireless parameters.
Access port serviceability parameters. Use history to access port history. The
following options can be used to access ap-history:
• XX-XX-XX-XX-XX-XX – Access port MAC.
Allocation counts for various buffers.
This command displays the details of the configuration and the information
gathered for AP locationing.
• config – Displays the configuration of AP locationing.
• report – Displays the information gathered for AP locationing.
This command displays the details of the configuration and the information
gathered for MU locationing.
• config – Displays the configuration of MU locationing.
• report – Displays the information gathered for MU locationing
legacy load balance algorithm compatibility mode
This command displays the wireless mobile units cache buckets.
This command displays the mobile units cache information.
Multi-Vlan Debug stats.
Radio serviceability parameters.
• <1-4096> – A single radio index.
• description – Description and location co-ordinates of radios.
• mapping – Radio-to-CPU Mapping.
instance
(config-wireless)