Motorola RFS7000 Series Reference Manual page 536
Rf switch
Hide thumbs
Also See for RFS7000 Series:
- Reference manual (732 pages) ,
- System reference manual (466 pages) ,
- Troubleshooting manual (60 pages)
Table of Contents
Advertisement
20-32
Overview
20.1.26 no
Wireless Configuration Commands
Use this command to negate a command or set its defaults.
Syntax
no(adopt-unconf-radio|adoption-pref-id|ap-detection|broadcast-tx-speed|country-
code|dhcp-sniff-state|dot11-shared-key-auth|fix-windows-dhcp|ids|mac-auth-
local|manual-wlan-mapping|mobile-unit|mobility|oversized-frames|proxy-arp|qos-
mapping|radio|self-heal|sensor|service|smart-scan-channels|wlan)
Parameters
Refer to
Table 20.1 on page 20-1
Example
RFS7000(config-wireless)#no mobility enable
RFS7000(config-wireless)#
for the parameters negated using the
command.
no
Advertisement
Table of Contents
