Motorola RFS7000 Series Reference Manual page 515

20.1.8 broadcast-tx-speed
Wireless Configuration Commands
Use this command to configure the rate broadcast and multicast traffic transmitted between the switch and
mobile units.
Syntax
broadcast-tx-speed(range|throughput)
Parameters
range
throughput
Example
RFS7000(config-wireless)#broadcast-tx-speed range
RFS7000(config-wireless)#
RFS7000(config-wireless)#broadcast-tx-speed throughput
RFS7000(config-wireless)#
Uses the lowest basic rate. Provides the maximum range.
Uses the highest basic rate. Provides the maximum throughput (default).
20-11