Motorola RFS7000 Series Reference Manual page 394

14-14 Overview
14.1.7 no
Extended ACL Config Commands
Use this command to negate a command or set its defaults.
Syntax
no(deny|mark|permit)
This command negates all the syntax combinations used in deny,
Extended ACL.
Parameters
deny
mark
permit
Usage Guidelines
Use the command to remove an access list control entry. Provide the rule-precedence value when using the
no
no command.
Example
RFS7000(config-ext-nacl)#no mark 8021p 5 tcp 192.168.2.0/24 any rule-precedence
10
RFS7000(config-ext-nacl)#
RFS7000(config-ext-nacl)#no permit ip any any rule-precedence 10
RFS7000(config-ext-nacl)#
RFS7000(config-ext-nacl)#no deny icmp any any rule-precedence 10
RFS7000(config-ext-nacl)#
Specifies packets to reject.
Specifies packets to mark.
Specifies packets to forward.
mark and permit commands to configure the