Motorola RFS7000 Series Reference Manual page 456

17-22 Overview
17.1.19 network
DHCP Config Commands
Use this command to configure the network pool's IP address. This maps the current DHCP pool with the
specific network.
Syntax
network [A.B.C.D|A.B.C.D/M]
Parameters
network
[A.B.C.D|A.B.C.D/M]
Usage Guidelines
Ensure a VLAN interface with specific network /subnet exists on the switch before mapping the DHCP pool to
a particular network.
Example
RFS7000(config-dhcp)#network
RFS7000(config-dhcp)#
Network number and mask.
• A.B.C.D – Network number in dotted decimal format.
• A.B.C.D/M – Network number and mask.
2.2.2.0/24