Motorola RFS7000 Series Reference Manual page 427

16.1.7 no
MAC Extended ACL Config Commands
Use this command to negate a command or set defaults.
Syntax
no(deny|mark|permit)
This command negates all the syntax combinations used in deny,
ACL.
Parameters
deny
mark
permit
Example
RFS7000(config-ext-macl)#no mark tos 254 host 00:33:44:55:66:77 any type ip rule-
precedence 50
RFS7000(config-ext-macl)#
RFS7000(config-ext-macl)#no deny any any vlan 5 type 8021q rule-precedence 10
RFS7000(config-ext-macl)#
RFS7000(config-ext-macl)#no permit any any type wisp rule-precedence 50
RFS7000(config-ext-macl)#
Specifies packets to reject.
Specifies packets to mark.
Specifies packets to forward.
mark and permit to configure the Extended
16-11