Table of Contents
Advertisement
Running the SCSISelect Utility
1. When this message appears on the video monitor:
<<<Press <Ctrl><A> for SCSISelect(TM) Utility!>>>
2. Press <Ctrl+A> to run the utility. When the main menu for the host adapter appears, choose the
device that you want to configure; each SCSI bus accepts up to 15 devices.
Use the following keys to navigate through the menus and submenus:
Table 14.
SCSISelect Navigation Keys
Press
To
ESC
Exit the utility
Enter
Select an option
↑
Return to a previous option
↓
Move to the next option
F5
Switch between color and monochrome
F6
Reset to host adapter defaults
Configuring the Adaptec AIC-7902 SCSI Adapter
The Adaptec AIC-7902 SCSI adapter has two buses. Select the bus from the following menu.
Table 15.
Adaptec Main Menu
Menu Item
You have an AIC-7902 adapter in your system.
Move the cursor to the bus:device:channel of the
one for configuration and press <Enter>.
<F5> - Toggle color/monochrome.
After selecting the bus, the following menu displays.
Table 16.
Menu for each SCSI Channel
Host Adapter
AIC-7902 at
Bus:Device:Channel
01:06:A (or 01:06:B)
When you are finished, press <Esc> and make your selection from the following menu.
Table 17.
Exit Menu
Feature
Option
BIOS Setup
You can run BIOS Setup with or without an operating system being present. BIOS Setup stores
most of the configuration values in battery-backed CMOS; the rest of the values are stored in flash
xSeries 343 Product Guide
Option
Comment
Configure/View
Press <Enter> to view the Configuration Menu.
Host Adapter
Settings
SCSI Disk Utilities
Press <Enter> to view the SCSI Disk Utilities Menu. This
menu allows you to format hard disks and/or verify disk
media.
Comment
Options
Bus:Device:Channel
01:06:A
01:06:B
37
Advertisement
Table of Contents
