Peripheral Bay
One peripheral drive (either a slim-line floppy drive or a slim-line CD-ROM drive) can be mounted in
the system using a blind-mate peripheral drive carrier inserted into the peripheral drive bay. The
peripheral drive bay is located above the hard drive tray and to the left. The blind-mate peripheral
drive carrier for the floppy drive is different from the blind-mate peripheral drive carrier for the CD-
ROM drive.
Hard Drive Tray
Hard Drive Bays
Up to two 1.0-inch Ultra-320* SCSI technology hard drives can be mounted in the hot swap drive
bays, which are located in the bottom front of the chassis. The front bezel must be removed to access
the hot swap drive bays.
Installed hard drives are auto assigned addresses 0 and 1. Do not jumper the SCSI ID Selector Block
on the hard drives. Refer to the following figure for SCSI ID assignment details.
xSeries 343 Product Guide
Figure 9. Peripheral Drive Bay
1
Figure 10. Hard Drive Bays
TP127
0
TP00474
29