DC Input Voltage Specification
The power supply will operate within all specified limits over the input voltage range outlined in
Table 8. The power supply will power-off if the DC input is less than -34 VDC.
Table 8.
DC Input Rating
Parameter
Voltage
DC Output Current Specifications
The combined output power of all outputs will not exceed 450 W. Each output has a maximum and
minimum current rating, as shown in Table 9. The power supply meets both static and dynamic
voltage regulation requirements for the minimum dynamic loading conditions. The power supply
meets only the static load voltage regulation requirements for the minimum static load conditions.
Table 9.
DC Power Supply Input/Output Summary
Voltage
+3.3 VDC Output
+5 VDC Output
+12 V1DC Output
+12 V2DC Output
+12 V3DC Output
-12 VDC Output
+5 VDC Standby
Output balancing
DC Line Voltage
DC Input Current
1.
Combined 3.3V/5V shall not exceed 150W.
2.
Maximum continuous load on the combined 12V output shall not exceed 25A. Peak load on the combined 12V output shall
not exceed 30A for greater than 10 seconds.
AC Power Subsystem
This section defines the AC input switching power subsystem.
Features
•
500-Watt output capability
•
"Power Good" indication LEDs
•
Predictive failure warning
•
Internal cooling fans with multi-speed capability
•
Remote sense of 3.3 Volt, 5 Volt, and 12 VDC outputs
•
"AC_OK" circuitry for brown-out protection and recovery
•
Built-in load sharing capability
•
Built-in overloading protection capability
•
Onboard field replaceable unit (FRU) information
2
•
I
C interface for server management functions
•
Integral handle for insertion/extraction
xSeries 343 Product Guide
Minimum
Nominal
Tolerance
Rating
-38VDC
-48 to -60VDC
20 Amp Max 1
26 Amp Max 1
16 Amp Max 2
12.0 Amp Max 2
12.0 Amp Max 2
0.5 Amp Max
2.0 Amp Max
Total combined output power of all output shall not exceed 450 W.
-48VDC to –60VDC
17.0 Amp maximum
Maximum
Tolerance
-75VDC
Current Rating
Maximum Input
Current
17.0 Amps
27