Replacing 3.3 Volt And 5 Volt Pci Add-In Cards In Full-Length Pci Adapter Subsystem; Figure 33. Segment B Full-Height, Full-Length Pci Adapter Subsystem; Table 26. Segment B Full-Height, Full-Length Pci Adapter Maximum Speed - IBM @server xSeries 343 Product Manual

Ibm @server xseries 343 server product guide
Table of Contents

Advertisement

Replacing 3.3 Volt and 5 Volt PCI Add-in Cards in Full-
Length PCI Adapter Subsystem
This PCI adapter assembly is configured and installed as shown in Figure 33. After the PCI adapter
assembly is removed from the system, it is configured with PCI adapters by plugging the PCI adapters
into the PCI connectors on the riser card (either a 3.3-Volt riser card or a 5-Volt riser card) that is part
of the PCI adapter assembly. The PCI adapter assembly is then installed into the system by plugging
the riser card into the riser card connector on the server baseboard. In addition, it is necessary to make
sure that the interlocking metal tabs on the back of the PCI adapter assembly are correctly inserted
into the slots in the back of the chassis.
3 Install PCI Adapter(s) in PCI
Adapter Assembly. Re-tighten
Captive Screw on PCI Card Keep
and Screw on PCI Bracket
to Secure PCI Adapter(s) in PCI
Adapter Assembly.
Full-Height, Full
Length PCI
Adapter

Figure 33. Segment B Full-Height, Full-Length PCI Adapter Subsystem

Table 26 shows the maximum PCI bus speed achievable on PCI Bus Segment B. Any slower PCI
adapter installed in the PCI Adapter Subsystem will gate the speed.
Table 26.
Segment B Full-Height, Full-Length PCI Adapter Maximum Speed
0 Adapter Cards installed and on-board
Dual NIC device enabled
1 Adapter Card installed and on-board
Dual NIC device enabled
2 Adapter Cards installed and on-board
Dual NIC device enabled
3 Adapter Cards installed and on-board
Dual NIC device enabled
1 Adapter Card installed and on-board
Dual NIC device disabled
xSeries 343 Product Guide
Configuration
Loosen Screw on
1
PCI Bracket.
3-slot PCI Adapter Assembly - supports
full-height/full-length PCI adapters and
full-height/half-length PCI adapters
Install PCI Adapter
4
Assembly in System
3.3 Volt Riser Card
5-Volt Riser Card
PCI-X 64 bit/100 MHz
PCI-X 32 bit/33 MHz
PCI-X 64 bit/100 MHz
PCI-X 32 bit/33 MHz
PCI-X 64 bit/66 MHz
PCI-X 32 bit/33 MHz
PCI-X 64 bit/66 MHz
PCI-X 32 bit/33 MHz
PCI-X 64 bit/100 MHz
PCI-X 32 bit/33 MHz
Loosen Captive Screw
2
on PCI Card Keep.
TP00469
101

Advertisement

Table of Contents
loading

Table of Contents