Input Select - Panasonic BT-LH910G Operating Instructions Manual

Main Menu
(continued)

INPUT SELECT

Sub menu
VIDEO
FORMAT
NTSC SETUP
SDI1
SDI2
HDMI
YP P
B R
COMPONENT
LEVEL
VF
VIDEO/YP P
B R
SIGNAL TYPE
INT SG
* 1
All of the seven input lines (VIDEO, SDI1, SDI2, HDMI, YP
six of the input lines are set to OFF, the one remaining input line cannot be set to OFF.
* 2
"AUTO" is the factory default, but select a specific format when there is risk that the input signal may be
interrupted by outside noise.
48
Settings Description
OFF Sets or cancels VIDEO line for the INPUT button.
ON
AUTO Used to select the format for VIDEO input.
NTSC <AUTO>
PAL <NTSC>
75 Selects NTSC setup level.
00 <75>
<00>
OFF Sets or cancels SDI1 line for the INPUT button.
ON
OFF Sets or cancels SDI2 line for the INPUT button.
ON
OFF Sets or cancels HDMI line for the INPUT button.
ON
OFF Sets or cancels YP
ON
SMPTE Selects YP
B75 <SMPTE> Signal level complies with SMPTE and P
B00
<B75>
<B00>
OFF Sets or cancels VF line for the INPUT button.
ON
VIDEO Used to select the VF input mode.
YP P <VIDEO> Selects the VIDEO signal.
B R
<YP P
B R
HD Used to select the signal output from the camera.
SD <HD>
<SD>
OFF Sets or cancels INT SG line for the INPUT button.
ON
The underlined values are factory preset setting values.
NTSC or PAL is selected automatically.
NTSC <PAL> PAL
Select this function when using 7.5 % setup signals.
(Adjusts the interior of the monitor to the 7.5 % setup level
to suit the black level)
Select this when the signal is at a 0 IRE setup level.
P line for the INPUT button.
B R
P (component) signal input level.
B R
V [p-p] at 100 % chroma.
Select this when connecting a Betacam or similar
device with a setup function. (Adjusts the interior of the
monitor to the 7.5 % setup level to suit the black level)
Select this when connecting a Betacam or similar
device without a setup function.
> Selects the YP P
B R
Selects the HD signal.
Selects the SD signal.
P , VF, and INT SG) cannot be set to OFF. If
B R
*
1
*
2
*
1
*
1
*
1
*
1
and P
B
*
1
(component) signal.
*
1
are 0.7
R