Audio - Panasonic BT-LH910G Operating Instructions Manual

Main Menu
(continued)

AUDIO

Set the audio output and audio level meter.
Sub menu
* *
SELECT L
1 2
* *
SELECT R 1 3
LEVEL METER
*
CH SELECT 4
POINT LINE
CH INFO.
*
HEAD ROOM
5
* 1
If the input signal is SD when CH5 to CH8 is selected:
The channel can be switched from CH5→CH1, CH6→CH2, CH7→CH3, and CH8→CH4. (The menu
settings remain as is.)
* 2
When an HDMI signal is input, the audio of CH1 is output to the headphones (L) regardless of the menu
setting.
*
3
When an HDMI signal is input, the audio of CH2 is output to the headphones (R) regardless of the menu
setting.
* 4
When an HDMI signal is input, the display becomes 2CH regardless of the menu setting. When an SD-
SDI signal is input, the display becomes 4CH even if 8CH is selected in the menu.
* 5
The factory preset setting value varies depending on the area set in "AREA SETTING" (page 35).
The underlined values are factory preset setting values.
Settings
CH1 - CH8
(Factory default: CH1)
CH1 - CH8
(Factory default: CH2)
OFF
ON
8CH
4CH
2CH
OFF
ON
OFF
ON
12dB
18dB
20dB
Description
Selects embedded audio channel output to
headphones (L).
Selects embedded audio channel output to
headphones (R).
Selects embedded audio level meter
displayed. (page 20)
Selects number of audio level meter
channels.
Switches the 0 dB line displayed on the
meter on and off.
Switches the channel displayed on the meter
on and off.
Sets the display position of the reference
point in the meter display.
49