Vf Function - Panasonic BT-LH910G Operating Instructions Manual

VF Function

The unit can be connected to broadcasting and business cameras made by Panasonic and used as a VF (viewfinder).
If you want to use the unit as a VF (viewfinder), remove the tilt stand (page 17).
Camera side VF terminal
* 1
Use a camera platform that can fully withstand the weight of the unit (1.7 kg (3.75 lb)).
<Note>
This unit requires a current that exceeds the output rating of a Panasonic camera-recorder, so the external
DC power cannot be supplied from the DC output terminal of a Panasonic camera-recorder.
Do not use the battery pack. If this unit is mounted on the camera-recorder with the battery pack attached,
the camera platform may be damaged. Use an external DC power supply.
Contact your vendor for details of broadcasting and business camera-recorders that will be launched in the
future.
■
Panasonic camera-recorders that allow the unit to be connected as a VF( viewfinder)
Panasonic Camera-
recorder
AJ-HPX3100G
AJ-HPX3700G
AJ-HPX2700G
AJ-HPX2000/2100
AJ-HDX900
AG-HPX500/502
(Monochrome images
of SD resolution)
* 1
Configure the menu settings in accordance with the output signal format of the camera (page 48).
* 2
For the settings, refer to the instruction manual of the camera.
* 3
The ZEBRA information can be set for the camera (page 37).
* 4
The tally lamp on the rear of the monitor lights in accordance with the REAR TALLY setting (page 37).
16
VF Video
Monitor
*
Signals 1
→ Camera
YP P VIDEO ZEBRA
B R
 
 
 
 
 
 
VF cable (Option)
Part number: BT-CS910G
VF connector on unit side
Camera platform
1
*
VF Communication
Camera → Monitor
TALLY
*
3
*
RED 4 GREEN
 

 
 
 

(commercially available)
*
2
Indication of Changing of
Abnormal Aspect (SD
Operating State Mode Only)








