Audio Input Select; External Device Link Settings; Hdmi-Cec Settings - Panasonic TH-86SQ1HW Operating Instructions Manual

Audio input select

[Audio input select] - submenu screen
Audio input select
HDMI1
HDMI2
DisplayPort
DIGITAL LINK
DVI-D
SLOT
Screen Transfer
Video input
HDMI1
HDMI2
DisplayPort
DIGITAL LINK
DVI-D
SLOT
Screen Transfer
● No audio: No audio input (Mute)
When the setting for the audio input has been
changed from the factory settings, the audio input is
displayed as below.
HDMI1
AUDIO IN

External device link settings

Sets external device link.
[External device link settings]- submenu screen
External device link settings
Device information
Wireless presentation link
■
[Device information]
Sets whether to display or hide the information of the
device connected to the HDMI terminal.
[Off]:
Connected device information is not
displayed.
[On]:
Connected device information is displayed as
shown below.
HDMI1
Player1
68
English
HDMI1
HDMI2
DisplayPort
DIGITAL LINK
AUDIO IN
SLOT
Screen Transfer
Audio input
HDMI1 / AUDIO IN / No audio
HDMI2 / AUDIO IN / No audio
DisplayPort / AUDIO IN /
No audio
DIGITAL LINK / AUDIO IN /
No audio
AUDIO IN / No audio
SLOT / AUDIO IN / No audio
Screen Transfer / AUDIO IN /
No audio
Full
Off
On
16:9
Note
● The obtained information of either signal or
HDMICEC is displayed.
● Up to the first 16 characters obtained are
displayed.
■
Wireless presentation link
This menu configures the settings for wireless
presentation system connection.
For details, refer to the operating instructions on the
following support site.
(https://panasonic.net/cns/prodisplays/wps2/)

HDMI-CEC settings

Set for HDMI-CEC function.
For details of HDMI-CEC function, refer to "Using HDMI-
CEC function". (see page 124)
[HDMI-CEC settings] - submenu screen
HDMI-CEC settings
HDMI-CEC control
HDMI1 ----
HDMI2 ----
SLOT ----
HDMI-CEC operation
MENU code
Link function
Display → Device Disable
Device → Display Disable
■
[HDMI-CEC control]
Enables/Disables the HDMI-CEC function.
[Disable]: Disables HDMI-CEC control.
[Enable]: Enables HDMI-CEC control.
Note
● Set to [Enable] to operate HDMI-CEC compatible
device with remote control of the unit.
■
[HDMI1]
Displays the device to operate when HDMI-CEC
compatible device is connected to HDMI 1 terminal.
The control subject can be changed with
Note
●
When there is no connected device, [----] will be
displayed.
■
[HDMI2]
Displays the device to operate when HDMI-CEC
compatible device is connected to HDMI 2 terminal.
The control subject can be changed with
Note
●
When there is no connected device, [----] will be
displayed.
Enable
1 1
.
.