Panasonic BT-LH910G Operating Instructions Manual page 26

Main Menu
(continued)
Sub menu
4:3 * *
2 4
*
BACK
2
*
CENTER
2
* 2
These settings are disabled when the GPI function (page 62) is used to control the marker setting.
* 4
These settings are enabled when the SD aspect setting for an SD signal is 4:3 (→ "SD ASPECT" on
page 31).
26
Settings Description
OFF Selects/displays the marker type for when the angle of view of
95% the displayed image is 4:3.
<OFF>
93%
90% <95%>
88% <93%>
80% <90%>
USER 85% <88%>
<80%>
<USER> Area marker that is adjustable in 1 % increments within
NORMAL Selects the background brightness around the marker.
HALF <NORMAL> Normal background
BLACK <HALF>
<BLACK>
OFF Displays the center marker.
ON <OFF>
<ON>
No marker display
95 % area marker
93 % area marker
90 % area marker
89 % area marker (TYPE1)
88 % area marker (TYPE2)
80 % area marker
a range of 80 % to 100 %. However, when MARKER
TYPE is TYPE1, 93 % becomes the aspect ratio of
the vertical 93.1 %, and 88 % the aspect ratio of the
vertical 89 %.
(The factory preset setting value is 85 %.)
50 % background brightness
0 % background brightness (black)
Turns the display off
Turns the display on
(Continued on next page)