Function - Panasonic BT-LH910G Operating Instructions Manual

Main Menu
(continued)

FUNCTION

Sub menu
FUNCTION 1 -
FUNCTION 3
* 1
The settings are cancelled when the power is turned OFF.
* 2
If these settings are changed, the menu settings will also change.
* 3
The control settings do not operate during GPI operation.
* 4
Not displayed when 16:9, 4:3 and CENTER are all OFF in the MARKER menu settings.
38
Settings Description
HV DELAY Selects functions to be assigned to [FUNCTION1] -
BLUE ONLY [FUNCTION3] (front panel buttons).
GAMMA SELECT <HV DELAY>
SD ASPECT
SCAN
SUB WINDOW D ELAY OFF → H DELAY → V DELAY → HV DELAY →
WFM/VECTOR
MARKER <BLUE ONLY>
WHITE BALANCE
PIXEL TO PIXEL
PIXEL POSITION
FOCUS-IN-RED <GAMMA SELECT>
ZEBRA
REAR TALLY
LEVEL METER GAMMA STANDARD → GAMMA FILM →
CROSS HATCH GAMMA STDIO/PST → GAMMA STANDARD
MONO <SD ASPECT>
BLACK MODE
TIME CODE <SCAN>
CLOSED CAPTION
UNDEF <SUB WINDOW>
SINGLE → FULL/PART → STILL → SINGLE
<WFM/VECTOR>
(Factory default:
FUNCTION1:
WFM/VECTOR
FUNCTION2: <MARKER>
PIXEL TO PIXEL
FUNCTION3:
FOCUS-IN-RED)
<WHITE BALANCE>
<PIXEL TO PIXEL>
<PIXEL POSITION>
The underlined values are factory preset setting values.
*
1
Displays the image blanking period.
The display changes in the following order.
DELAY OFF
*
1
Cuts the red and green signals. Use this function to check
phase and chroma. This button toggles between ON and
OFF.
* *
2 3
Displays the gamma curve.
The display changes in the following order.
* *
2 3
Switches between "16:9" and "4:3."
* *
2 3
Switches between "UNDER SCAN" and "NORMAL SCAN".
*
1
Sets the split-screen function.
The display changes in the following order.
*
2
Displays waveform or vector display.
For details on the available operation items, refer to page
41.
* * *
2 3 4
Turns the marker on and off.
For details on the available operation items, refer to page
41.
WHITE BALANCE GAIN/BIAS RGB direct adjustment can
only be accessed when VAR1 to VAR3 are selected in
COLOR TEMP.
Turns the PIXEL TO PIXEL function On and Off.
Positions the display of signals in PIXEL TO PIXEL mode.
(Continued on next page)