Panasonic BT-LH910G Operating Instructions Manual page 42

Main Menu
(continued)
■
"SUB WINDOW"
Opening the "SUB WINDOW" function splits the screen (main window) in two as shown below to enable
comparison of a recorded still image with live video.
Use the "SUB WINDOW" setting (FULL, PART) in the "SYSTEM CONFIG" menu (page 34) to set up the
function as shown below.
Press the button ([FUNCTION1] to [FUNCTION3] (page 38)) to which the "SUB WINDOW" function has
been assigned to turn the function on and off.
• This assumes that the "SUB WINDOW" function has been assigned to any of the [FUNCTION1] to
[FUNCTION3] buttons.
To setup "I-P MODE" (page 31), exit the "SUB WINDOW" function first.
• FULL
Resizes the main window to also display a second window (two sub-windows).
Normal window
(main window)
Video
• PART
Resizes the main window to show only its center to also display a second image (two sub-windows).
Normal window
(main window)
Video
Crops the image to show its
center part
Note on FULL/PART selection
This function is designed to enable comparison of identical formats input to the same input terminal. Input
of different formats via different input channels may distort the sub-window (left side, still image) or blanking
could occur. However, input of an identical format signal to the input terminal during still image acquisition
will display correctly.
42
Press the FUNCTION button to which the SUB WINDOW function has been assigned.
(two sub-windows)
Press the
button again
Press the FUNCTION button to which the SUB WINDOW function has been assigned.
(two sub-windows)
Press the
button again
The cropped main window
image is placed side by side
with a second image
Before memory
button again
Video Video
Before memory
button again
Video Video
These examples show 16:9 aspect ratio images.
After memory
(two sub-windows)
Press the
Still image
(Left side is stored
in memory.)
After memory
(two sub-windows)
Press the
Still image
(Left side is stored
in memory.)
Video
Video