When The Receive File Indicator Is Lit - Ricoh 1018 Operating Instructions Manual

When the Receive File Indicator is Lit

If the Receive File indicator is lit, a message has been received but could not be
printed for some reasons. The message was stored in memory (Substitute Recep-
tion). When you solve the problem, the message will be automatically printed
out. The table below lists some problems that could have caused Substitute Re-
ception to take place and their solutions.
Why Substitute Reception
Occurred
Paper has run out
Toner is empty
Paper is jammed
Cover is open
Machine is busy printing
with other function
Indication/Status
B is lit red.
D is lit
x is lit
M is lit
The machine is printing
with other function.
When the Receive File Indicator is Lit
Solution
Add paper.
See Chapter 3 "Loading Paper" in
the Copy Reference.
Replace the toner cartridge.
See Chapter 3 "Changing the Toner
Cartridge" in the Copy Reference.
Remove the jammed paper.
See Chapter 3 "Clearing Misfeeds" in
the Copy Reference.
Close the cover.
A cover other than the Document
Feeder or front cover is open.
The message will be printed after the
current job finishes automatically.
4
61