Error Messages And Their Meanings - Ricoh 1018 Operating Instructions Manual

Error Messages and Their Meanings

If there is an error, one of the following messages may appear on the display. It
might just flash up briefly, so if you are watching for errors, stay by the machine
and check the display.
Message
Clear Misfed Orig. Remove original from ADF
Cover
Reset Original(s) and press Start
Clear Misfed Orig. Remove original from ADF
Cover
Cannot detect original size. Reset original(s)
and press Start.
LService call
Functional problem with the fax. Please con-
tact your service representative.
Memory is Full. Storing Stopped, Transmis-
sion Has Been Cancelled.
Exceed the Max. Cannot Add
Error Messages and Their Meanings
Problem and Solution
Original misfeed
Remove originals from the Document Feeder.
Set any pages of the original that were not
scanned and send again.
Original jammed during Memory Transmis-
sion. Reset originals that have not been
scanned.
A document jam occurred during Immediate
Transmission. Press {OK} and resend the page
which has not been sent.
An error occurred during Immediate Trans-
mission. Press {OK} and resend the original.
Note
❒ There may be a problem with the machine
or the telephone line (for example noise or
cross talk). If the error re-occurs frequently,
contact your service representative.
The machine failed to detect the size of the
original. Press the 0 or 1 key to select the size
and press the {Start} key three times.
There is a problem with the fax function. Con-
tact your service representative and tell the
code number shown in the display. The copier
function will still work normally.
If you press {OK}, the machine returns to the
standby mode and starts transmitting pages
which has been scanned.
You cannot dial any more numbers. When
these files have been sent and their fax num-
bers are deleted from memory, additional fax
numbers can be dialed.
4
59