Quick Dials - Ricoh 1018 Operating Instructions Manual

Faxing
Tone
This feature allows a machine con-
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the {Tone}
2 key, the machine dials the number us-
ing tonal signals.
Limitation
❒ You cannot place a tone before the
first digit of a fax number.
❒ Some services may not be available
when using the {Tone} key.
Note
❒ A tone is shown as a "•" on the dis-
play.
32

Quick Dials

When you have stored a destination's
number in a Quick Dial key, you can
dial the number by just pressing that
key.
Additionally, you can store a name
that will appear on the display when-
ever you press that Quick Dial. See
P.40 "Registering Quick Dials".
Note
❒ To check the contents of the Quick
dial, print the list.
❒ If a Quick Dial key is currently
used for another function, for ex-
ample a Group Dial, you cannot
store a number in it.
❒ Flip the Quick Dial plate over to
access Quick Dial keys 01-16 or 17-
32.
❒ You can have the label stored with
a Quick Dial printed on the first
page received at the other end.
Reference
P.30 "Dialing"
A
Make sure that the machine is in
standby mode.
B
Set your original and select any
scan settings you require.