Speed Dials - Ricoh 1018 Operating Instructions Manual

C
Press the Quick Dial key in which
the destination's number is pro-
grammed.
If the destination's name has been
stored, the name is shown on the
display. If it is not, the fax number
is shown.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ If you wish to dial another des-
tination, press the {OK} key and
dial another fax number.
D
Press the { { { { Start} } } } key.

Speed Dials

If you store a number in a Speed Dial,
when you want to dial it, just press
the {Speed Dial} key followed by a 2
digit code. See P.46 "Registering Speed
Dial".
Note
❒ To check the contents of registered
Speed Dials, print the Speed Dial
list.
❒ You can use codes 00-99 for Speed
Dials.
❒ If a search letter is registered with
a Speed Dial, you can find this
number quickly using the Tele-
p h one D ire ct ory feat ure. Se e
Chapter 3 "Telephone Directory"
in the Advanced Features manual.
❒ You can have the label stored with
a Speed Dial printed on the first
page received at the other end.
A
Make sure that the machine is in
standby mode.
B
Set your original and select any
scan settings you require.
Dialing
2
33