Deleting Speed Dial - Ricoh 1018 Operating Instructions Manual

Setup
N
Press the { { { { OK} } } } key.
If you want to store another Speed
Dial number, go to step E.
O
Press the { { { { User Tools} } } } key to re-
turn to standby display.
3
Speed Dial list
Print this list to check which destina-
tions are programmed. See Chapter 5
"Printing Reports/Lists" in the Ad-
vanced Features manual.

Deleting Speed Dial

Use this procedure to delete any
Speed Dials you are not using any-
more.
Limitation
❒ If a registered Speed Dial is being
used for a standby Memory Trans-
mission, the message "
is in Use. Cannot Delete.
shown and you cannot change the
destination for this Speed Dial.
A
Press the { { { { User Tools} } } } key.
48
B
Press 0 0 0 0 or 1 1 1 1 until "4. Fax Fea-
tures" is displayed.
C
Press the { { { { OK} } } } key.
Confirm that "1. Program / Delete"
is displayed.
D
Press the { { { { OK} } } } key.
E
Press 0 0 0 0 or 1 1 1 1 until "4. Del. Speed
Dial" is displayed.
F
Press the { { { { OK} } } } key.
G
Display the Speed Dial number
This Dial
you want to delete (00 to 99).
" is
Enter the Speed Dial number with
the number keys or search using 0
or 1.
The Speed Dial number and the fax
number or name are displayed.
❒ If you want to delete a digit of
Note
the number, press the {Clear/
Stop} key and enter the correct
number.