When The {Facsimile} Key Is Lit In Red - Ricoh 1018 Operating Instructions Manual

Troubleshooting

When the {Facsimile} key is Lit in Red

If this key is lit, refer to the table below and take the appropriate action.
Problem
Paper has run out.
The machine is in RDS (Remote Diagnostic
System) mode.
A facsimile error has occurred.
4
60
Solution
Add paper.
See Chapter 3 "Loading Paper" in the Copy
Reference.
Wait with the Main Power switch on. Machine
will go to the standby mode after it exits from
the RDS mode.
The facsimile has a problem. Contact a service
representative. The copier function will still
work normally.