Power Supply - Vision Fitness X6100 Owner's Manual

PLACEMENT IN YOUR HOME
Please follow the safety instructions to place the Elliptical Trainer in the
location where it will best be used. It is important that you place your
Elliptical Trainer in a comfortable and inviting room. Avoid putting your
Elliptical Trainer in an unfinished basement or undesirable setting. Exercise
adherence will be achieved only if you exercise in an attractive setting.
STABILIZING THE ELLIPTICAL TRAINER
After positioning the Elliptical Trainer
in its intended location, check its
stability by attempting to rock it side
to side. Excessive rocking or
wobbling indicates that your
Elliptical Trainer needs to be
leveled. Your Elliptical Trainer has
levelers located under the guide
rails and under the side stabilizers.
Determine which leveler is not
resting completely on the floor.
Loosen the wing nut to the base of
the leveler to allow the leveler to
rotate. Now rotate the leveler to the
left or right until the Elliptical Trainer
is stable. Lock the adjustment by
tightening the wing nut against the
stabilizer or guide rail.
POWER SUPPLY (MODEL X6100 )
Your Elliptical Trainer uses a wall mount external power supply. Use only
the power supply provided with your Elliptical Trainer. If you misplace
this power supply, please contact your authorized Vision Fitness retailer
6
for an original replacement. Use of the wrong power supply may cause
damage to your Elliptical Trainer.